TESLA VEHICLE SERVICE TOOL

LOKI provides all the necessary service functionality for repairing and servicing Tesla Model S, Model X, Model 3, and Model Y.

• Allows you to work with the central computer (CID, IC), service functions of the vehicle’s units, their settings, calibration, firmware, reading, analysis, and clearing of fault codes.
• Easy to install, connect to the vehicle, and operate.
• Features an intuitive interface.
• Features free automatic software updates.

The device package includes:

• LOKI module.
• Cable. LC001-CS – CAN Cable for Tesla Model S
• LC002-LS – LAN Cable for Tesla Model S/X
• LC003-CX – CAN Cable for Tesla Model SR, Model X
• LC004-L3 – LAN Cable for Tesla Model 3
• LC006 – Cable for Tesla Model 3, Model Y

Additional Features:

1. Secured Config – 2500 EUR

Advanced features for working with Model 3. Requires the LOKI device, a special cable, and software.

2. Key binding for Model X – 2500 EUR

Requires a LOKI device, a special cable, and software.

3. Tesla Diagnostics Training – 900 EUR

What functionality is available as of June 2022:

• Works with Tesla vehicles: Model S, Model X, Model 3, Model Y;
• Full diagnostics of Model S/X/3/Y on any firmware (CAN diagnostics are available after firmware 2021.4.12);
• Live Data from CAN units (Model 3/Y):
• BMS (Battery Management System)
• DI (Drive Inverter)
• CP (Charge Port)
• PCS (Power Conversation System)
• EPAS (Electronic Power Assist Steering)
• VCFRONT (Vehicle Control Front)
• VCLEFT (Vehicle Control Left)
• VCRIGHT (Vehicle Control Right)
• SCCM (Steering Column Control module)
• Live Data from CAN blocks (Model S/X):
• MCU (Media Control Unit)
• THC (Thermal Heat Controller)
• BMS (Battery Management System)
• DI (Drive Inverter)
• CHG (Charger)
• CP (Charge Port)
• BDY (Body Controller)
• TAS (Air Suspension System)
• DAS (Driving Autopilot System)
• PARK (Park Assist Module)
• TPMS (Tire Pressure Monitor System)
• Self-testing of various vehicle systems (Model S/X/3/Y on any firmware)
• Manually updating a car from AP22.53.0 MXMSM3;
• Installing and configuring navigation: including on MS (Tegra/Intel), MX (Tegra/Intel), M3, MODEL Y;
• Installing new firmware;
• Complete reconfiguration of Model S/X Tegra vehicles up to 2020.48;
• Complete reconfiguration of Model S/X Intel vehicles up to 2020.48 and partial reconfiguration after;
• Partial reconfiguration of Model 3 vehicles (Security Configuration presented separately);
• Ability to change the configuration on M3 firmware up to and including 2021.4.12, without soldering.
• Alert library available;
• Erase service alerts;
• Delete DTCs from individual vehicle units;
• Deactivate Valet Mode with reading the set PIN code (up to 2021.4.12). Online functions can be used on all subsequent versions*.
• Deactivate PIN to Drive with reading the set PIN code (up to 2021.4.12). All systems can now use online functions*;
• Activate Factory/Diagnostic/Developer Mode (on all firmware versions up to 2021.4.12 (Intel));
• Put vehicle systems into service mode;
• Link units to the vehicle (REDEPLOY, VIN learn);
• Configure, adapt, and calibrate units;
• Calibrate all seats on MX;
• Calibrate the MX steering column;
• Calibrate the AP2.53.0 MSMXM3MY radar;
• Remove special alerts from BMS;
• Remove CRASH from TAS;
• Remove CRASH from SRS (except BOSCH V2);
• Update Autopilot firmware;
• Model S key binding (in the complete absence of a key).
• Online functions (the ability to read alerts and configuration, switch SIM cards, reset passwords and protections on the car regardless of the firmware version, reset the updater, run redeploy, and much more (features depend on the firmware on the car))

Secured Configuration Plugin Functionality (for M3 only).

• Vin – Vin number of the car, necessary when changing the MCU or using donor certificates.
• Carcomputer_pn, carcomputer_sn – SN MCU, required when changing the MCU
• Country – Changing the country configuration, required to change the headlight blinking algorithm to European, or converting a car for the Asian market to European
• Autopilot – Changing the autopilot type, for example, to FSD
• SuperchargingAccess – Activating the supercharger (v1, v2)
• PerformancePackage – Activating Performance or Acceleration Boost depending on engine types
• ConnectivityPackage – Activating Premium Connectivity
• SoftRange – Removing the software limitation on battery capacity on a car where it is present
• ImmersiveAudio – Activation of additional audio system options

The cable supports operation with the M3MY MCU (for M3s after 2020 and MY, the gateway chip must be resoldered; for other models with an open JTAG port, the device must be resoldered).

Secured Configuration is an additional paid product that expands the device’s capabilities. Requires Loki, an LC005 cable, and software.

Key Binding Plugin Functionality for Model X
The plugin supports binding keys of all currently available versions (SE v3 and SE v4) to Tegra and Intel-based vehicles.

A dongle for interfacing Loki with the key is included.

Loki connects to the car via the CAN bus under the monitor using the included LC003-CX cable (included with Loki). A blank key is required for pairing.

The plugin requires internet access.

Net weight: 0.42 kg – this is the weight of the LOKI module + all included cables. Gross weight: 1.3 kg – the weight in packaging.