Mack Adblue Emulator (SCR)

Mack is commonly used in the United States with EPA10 and EPA14 emission standards. These standards differ from European standards. The Mack series produces many errors that are usually related to the SCR and DPF systems or NOx sensors. Stuck soot levels are also a big problem for the Mack series. Sometimes the soot level rises, and you cannot reset it with a diagnostic tool. This is a chronic problem for the Mack series. You can reduce soot levels using an adblue emulator without resetting the soot coefficient in Tech Tool. These problems result in a loss of money and time. Many users use the Mack adblue emulator to troubleshoot all Adblue system problems. And users can avoid costly repairs and lost time by using the AdBlue emulator.
The Mack Adblue Removal Emulator is designed to cancel the AdBlue system on all Volvo engines (trucks, buses, construction equipment). The Mack AdBlue cancellation device cancels the entire AdBlue system on your truck. Then the truck will never consume DEF fluid again. And you won’t see any AdBlue system faults on the dashboard. The Mack AdBlue removal device prevents all torque loss errors.
This device connects to the ACM (Adblue control unit) connector, where the middle of the chassis. The epa10 series has 1 Can-Bus line, and the epa14 series has 2 Can-Bus lines. That’s why they have different connection styles. After connection, the AdBlue system is disabled. And if you have any AdBlue system malfunctions (NOx sensor, NH3 sensor, DPF filter, Def pump), the Mack emulator will solve all your problems.

Mack Adblue Emulator can disable these systems.

• AdBlue pump
• NOx sensors
• Exhaust gas temperature sensors
• DPF differential pressure sensor
• AdBlue level temperature sensor
• ECU (ACM line only)
• ADblue Control Unit
• Diesel Particulate Filter Regeneration

The systems are disabled after you start using the AdBlue emulator on your standard US truck. After connecting, you will not receive any SCR or DPF system errors. And you solve all your high soot problems with this emulator.

Mack Adblue Removal can fix these faults;

• Stuck soot level error (144% or 88%)
• Nox sensor faults
• Adblue pump faults
• Adblue quality faults
• NH3 sensor faults
• Particulate filter faults Filters
• Regeneration Errors
• Torque Loss Malfunctions
• Soot Level Critically High

Supported Models

• Mack epa10
• Mack epa14

Advantages of Mack epa10 and epa14 AdBlue Remover;

– You don’t need fuel AdBlue

– Prevent all AdBlue system errors

– Prevent torque loss

– You are not receiving an AdBlue or NOx error

NOTE: After connecting, you may see some DTCs about the AdBlue system. And you may need to clear them using a diagnostic tool (VOCOM Tech Tool).