Volvo B8R Bus Euro 6 Adblue Removal Emulator

The Volvo B8R Adblue Removal Emulator resolves common DPF and regeneration errors in Volvo B8R buses. The Volvo B8R Euro 6 Adblue Removal Emulator is designed to replace the catalytic AdBlue exhaust system. It electronically bypasses the vehicle’s AdBlue system.

Volvo B8R Bus Euro 6 AdBlue Removal Emulator Benefits:

– Prevent all AdBlue system errors

– No AdBlue fuel required

– No AdBlue or NOx errors

– Prevent torque loss

The Importance of the Volvo B8R Bus Euro 6 Adblue Emulator

Trucks commonly generate AdBlue or NOx system errors, so they work hard. Your truck may lose torque, causing some AdBlue errors or malfunction lights to appear.

These problems cost you money and time. After installing the AdBlue Remove emulator, you will not receive any further AdBlue errors.

And you won’t need to add AdBlue fuel. The AdBlue fuel level will automatically increase after installation.

Disable these systems with the AdBlue Remove emulator

– AdxBlue System (All)

– AdxBlue NOX Sensor

– Diesel Particulate Filter System

– Diesel Particulate Filter Temperature Sensors

– Diesel Particulate Filter Regeneration

Supported Models:

D8K, 7698 cc, inline 6-cyl. turbodiesel (2013-present)

• D8K280 – 206 kW (280 hp), 1050 Nm, Euro 6
  D8K320 – 235 kW (320 hp), 1200 Nm, Euro 6
  D8K350 – 258 kW (350 hp), 1400 Nm, Euro 6

D8C, 7698 cc, in-line 6-cyl. Turbodiesel (2017-present)

• D8C250 – 186 kW (250 hp), 950 Nm, Euro 3/Euro 5
• D8C330 – 246 kW (330 hp), 1200 Nm, Euro 3/Euro

If your engine type is not listed, please let us know.

NOTE: After connecting, you may see a fault code for the AdBlue system. You may also need to clear it with a diagnostic tool.