The Doosan DPF Emulator is a device that completely removes the DPF system from your Doosan vehicle. With this emulator, you can clear all DPF errors from your vehicle. You can even completely remove the DPF to relax the vehicle’s exhaust system.

Doosan is a major engine manufacturer. As such, it has a wide range of forklifts and work vehicles. This forklift series includes two models that use AdBlue® fluid instead of AdBlue®.
Troubleshooting the exhaust system of Doosan models equipped with a DPF only is very simple.

The Doosan DPF emulator emulates the Temperature 1, Temperature 2, Temperature 3, and DPF differential pressure sensors. Using a Doosan DPF emulator is a quick and reliable solution. The Doosan Exhaust Temperature Sensor 1, Exhaust Temperature Sensor 2, and Exhaust Temperature Sensor 3 are easily distorted because they are located on the exhaust. Failure of any one of these components will result in a loss of torque from your vehicle.
A Doosan DPF failure will limit vehicle torque and lead to vehicle failure.
A Doosan pressure sensor error can often be caused by errors caused by an overloaded DPF in your vehicle. Using a Doosan DPF emulator eliminates vehicle torque limitation, reducing time, costs, and labor.

Use a DPF emulator to detect temperature sensor errors and completely prevent malfunctions by simulating the exhaust system. The Doosan DPF is located in the exhaust outlet and between the Doosan DPF pressure sensors. The Doosan DPF has very small pores. Thus, it was used to reduce the dirty air passing through the exhaust to meet emission standards.

Since the Doosan DPF has very low porosity, it can become clogged with soot in approximately 4 hours. The resulting soot level in the Doosan DPF will cause the vehicle to malfunction and may eventually fail due to torque limitation. In the event of a power outage, the DPF must be removed and cleaned by authorized personnel. This leads to significant costs and wasted time. It is sufficient to use a Doosan DPF emulator to root errors such as DPF errors and temperature sensors.

After this, the DPF screen will be blank, and the DPF will remain clean. No warnings or errors will appear on the DPF screen. With the Doosan DPF emulator, you will not receive exhaust system warnings. Doosan temperature sensors, differential pressure sensors, and DPF errors are not included. Furthermore, sensors removed after installation may have been repaired.