Bucher forklifts are equipped with a Bucher NOx sensor, a Bucher temperature sensor, and a Bucher differential pressure sensor because the forklifts use AdBlue and comply with this standard.
The Bucher NOx sensor is a sensor on the exhaust side of Bucher vehicles. The NOx sensor can often fail due to its location. A failure of the Bucher NOx sensor causes restrictions in the system. The vehicle operates due to the resulting restriction, but is unable to achieve sufficient power and torque. The Bucher AdBlue Emulator will help you troubleshoot the problem.
The Bucher Adblue Emulator is the best solution for NOx sensor, temperature sensor, differential pressure sensor, and DPF errors.
The Bucher differential pressure sensors are located before and after the Bucher DPF. If your DPF is damaged or clogged, Bucher vehicles will receive a fault notification.
This warning will prompt users to replace or clean the DPF, depending on the situation. At the same time, depending on the DPF filter’s condition, Bucher differential pressure sensors inform the vehicle’s ECU.
The Bucher AdBlue Emulator will provide you with solutions in the event of a clogged DPF or differential pressure sensors. This will ensure your car operates at full power even if the NOx sensor and temperature sensor are damaged or temporarily out of order.

Cancelled areas with the Bucher emulator:

• NOx Sensors
• Particulate Filter
• Differential Pressure Sensor
• AdBlue Level
• Temperature Sensor